US Robotics 7931 Betriebsanweisung PDF herunterladen (Seite 260)

236 Sun StorageTek SAM Archive Configuration and Administration Guide • Version 4, Update 6, 04/07

▼ To Import Tapes

To import tapes, follow these steps.

1. Open the door of the automated library by pushing the open/close button on the

front panel of the automated library.

2. Load the cartridges into the mailbox slots.

3. Push the open/close button on the front panel of the automated library and

manually close the door to the mailbox.

The automated library checks the mailbox slots for the cartridge barcodes after the

door is closed. If there is a problem with the barcodes, both the in and out lights

flash for that slot.

4. Use the import(1M) command to enable the Sun StorageTek SAM system to

recognize the imported cartridges.

Use this command in the following format:

For eq, specify the equipment ordinal of the device being addressed as defined in the

mcf file.

You can also perform this step by using File System Manager. For more information,

see the File System Manager online help.

Exporting Tapes

The procedure for exporting tape cartridges differs depending on whether or not

you are using the mailbox slots as storage slots.

▼ To Export a Tape Without Using the Mailbox Slots As

Storage Slots

Use the following procedure to export a cartridge when you are not using the

mailbox slots as storage slots.

1. Issue the move(1M) command to move the cartridge to a mailbox slot (slots 400–

407).

Use this command in the following format:

import eq

move source-slot destination-slot eq

1 2 ... 255 256 257 258 259 260 261 262 263 264 265 ... 287 288

Keine Kommentare

US Robotics 7931 Betriebsanweisung Seite 260