US Robotics COURIER Bedienungsanleitung PDF herunterladen (Seite 201)

100

101

U.S. Robotics I-modem Command Reference

Analog Synchronous Applications • Page 16-16

Note Due to the nature of synchronous dialup, the I-modem auto-answers only

on the third or fourth ring.

Example: ATS0=1 <Enter>

5. Set the I-modem to enter clear-channel synchronous mode.

Example: AT*V2=4 <Enter>

Dialing

6. Send &M1 to have the I-modem enter synchronous mode, followed by the number to

dial. Dial should be the last command before the Carriage Return.

Example: AT&M1DT555-1234 <Enter>

Alternatively, you can combine all the previous commands into a compound command,

like this:

AT&F0B0&X0&N0S0=1&M1*V2=4DT555-1234 <Enter>

This tells the I-modem to load the Òno ßow controlÓ factory template, and then use the

V.25 answer sequence, make the I-modem the source of timing signals, set a variable

connection rate, auto-answer incoming calls, switch to online synchronous mode after

connection, enter clear-channel synchronous mode, and then dial 555-1234.

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 307 308

Kommentare zu diesen Handbüchern

Keine Kommentare

US Robotics COURIER Bedienungsanleitung Seite 201

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung US Robotics COURIER