US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Bedienungsanleitung Seite 94
- Seite / 108
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
56K Softmodem
Command Reference
- 86
Note:†Values are country-specific.
S-Register Definitions
S0—Auto-Answer Ring Number
This register determines the number of rings the modem will count before
automatically answering a call. The user can disable autoanswer by entering zero.
When autoanswer is disabled, modem can answer only with the A command.
Range: 0—255.
Default: 0.
Base Unit: 1 ring.
S1—Ring Counter
S1 is incremented each time the 56K Softmodem detects a ring signal on the
telephone line. S1 is cleared if no rings occur over a six second interval. This
register is read-only.
Range: 0—255.
Default: 0.
Base Unit: 1 ring.
S2—AT Escape Character (User-Defined)
S2 holds the decimal value of the ASCII character used as the escape character.
The default value corresponds to an ASCII +. The escape sequence allows the
modem to exit data mode and enter command mode when on-line. A value over
127 disables the escape process, i.e., no escape character will be recognized.
Range: 0—255.
Default: 43 (+).
Base Unit: ASCII.
S3—Carriage Return Character (User-Defined)
S3 sets the character used to terminate command line and result codes. Note:
This register value is not stored with the &W command.
Range: 0—127.
S94 DTMF transmit attenuation level for
high DTMF group.
0—25 dB 0
- 56K Softmodem 1
- Command 1
- Reference 1
- Contents 3
- Introduction 7
- AT Command Conventions 9
- Basic Syntax Commands 10
- Extended Syntax Commands 10
- S Register Conventions 11
- Other Document Conventions 11
- AT Command Set 13
- Dial Modifiers 15
- TI<value> Commands 17
- ATI11 Command Results 19
- N<value> Commands 21
- Q<value> Commands 22
- &M<value> Commands 28
- Result codes: 31
- \A0 64 characters 32
- \A1 128 characters 32
- \A2 192 characters 32
- -C<value> Commands 38
- +A8T=<sig 42
- >—Send V.8 bis 42
- +A8T Extended Syntax Commands 42
- <max_codewords_tx> 45
- Valid <timed> Values 47
- +MR Extended Syntax Commands 61
- Fax Commands 69
- +FRH Commands 73
- +FRM Commands 74
- Test and Debug AT Command 77
- Result Codes 89
- Result Code Numeric 90
- Description 90
- S-Registers 92
- S-Register Definitions 94
- Default: 7 (00000111b) 98
- Command Reference 104
Verwandte Produkte und Handbücher für Modems US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1
(158 Seiten)
(30 Seiten)
(44 Seiten)
(80 Seiten)Sony Zubehör für Video Benutzerhandbücher
Beginnend mit C
Kommentare zu diesen Handbüchern