US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Bedienungsanleitung PDF herunterladen (Seite 16)

56K Softmodem

Command Reference

- 10

Table 3-4: E<value> Commands

F<value>—On-Line Data Character Echo Command

This command is supported to ensure compatibility with communications software

that issues the F1 command. The F0 version of this command is not supported.

This command was originally used to set echo features for the DTE.

Result codes:

OK if <value> = 1.

ERROR if <value> does not equal 1.

Table 3-5: F<value> Commands

H<value>—Hook Control

This command instructs the modem to go either on-hook to disconnect a call

or off-hook to make the telephone line busy.

Result codes:

OK if <value> = 0—1*.

ERROR if <value> does not equal 0—1.

Table 3-6: H<value> Commands

I<value>—Request ID Information

This command displays specific product information about the modem. Result

codes:

As described in Table 3-7: if <value> = 0—11.

Command Function

E0 Disables echo command.

E1 Enables echo command (default).

Command Function

F0 On-line data character echo enabled (not supported).

F1 On-line data character echo disabled.

Command Function

56K Softmodem goes on-hook (default).

56K Softmodem goes off-hook.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 107 108

Keine Kommentare

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Bedienungsanleitung Seite 16