US Robotics x2/56K Betriebsanleitung PDF herunterladen (Seite 17)

INTERNAL MODEM INSTALLATION WITH WINDOWS 3.X

TIP: Grasp the jumper shunts with

a tweezers or needle-nosed pliers. DO

NOT grasp too firmly, as you may crush

the jumper shunts. If a jumper shunt

seems stuck, gently rock it back and

forth as you lift. Do not touch any other

part of the modem or your computer

with the tweezers/pliers. A jumper

shunt needs to be sitting on both

jumper pins in order to effectively set

the modem to the desired setting.

4. Move the jumper shunt to the new setting.

• The COM port setting can involve one

to three shunts. The four possible COM

port settings are as follows:

0 1 SEL

COM 1

0 1 SEL

COM 3

0 1 SEL

COM 4

0 1 SEL

COM 2

• Unlike most COM port settings, the

IRQ setting involves only one jumper

shunt. Simply move the jumper shunt to

the pins labeled with the IRQ you need.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 114 115

Keine Kommentare

US Robotics x2/56K Betriebsanleitung Seite 17