US Robotics x2/56K Betriebsanleitung PDF herunterladen (Seite 16)

INTERNAL MODEM INSTALLATION WITH WINDOWS 3.X

accessories elsewhere so that you can

disable its COM port. The accessory will

not work once its port is disabled.

If you’ve disabled COM1, you can now use

the COM1/IRQ4 setting. Write this setting

down where it will be convenient during the

software installation.

If you’ve disabled COM2, you can now use

the COM2/IRQ3 setting. Write the setting

down where it will be convenient during the

software installation. Go to “How to Change

the Modem’s Settings” (on this page).

How to Change the Modem’s

Settings

1. Always touch an unpainted metal part of

your computer (the back is usually

unpainted) to discharge static electricity

before handling the modem. Static can

damage your modem. Then take the

modem out of its plastic bag.

2. Find the COM and IRQ jumper shunts

(small black plastic pieces) on your

modem’s jumper pins (see the following

diagram).

3. To change the COM port and IRQ settings,

you need to reposition the jumper shunts on

the COM port and IRQ pins. To do this, lift

the jumper shunts off the pins.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 114 115

Keine Kommentare

US Robotics x2/56K Betriebsanleitung Seite 16