US Robotics Wireless Cable/DSL Router Installationsanleitung Seite 13
- Seite / 20
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
9
Troubleshooting and Support
If you have any difficulties connecting to the 802.11g 54Mbps Router, check the following top
three issues and see if they apply to your situation.
• If you are attempting to create a wireless connection but cannot connect to the 802.11g
54Mbps Router, make sure each wireless card is set to Infrastructure mode. If the wireless
cards are set to 802.11g Ad hoc mode, you will not be able to connect to the 802.11g 54Mbps
Router. When each wireless card is set to Infrastructure mode, it should automatically connect
to the Access Point of the 802.11g 54Mbps Router. If the wireless cards do not automatically
connect, rescan until they detect the 802.11g 54Mbps Router and connect.
• If you create a wireless connection to the 802.11g 54Mbps Router but are experiencing poor
link quality, check the positioning of the 802.11g 54Mbps Router. Long distances, multiple
floors, or steel or concrete walls can diminish the link quality. If possible, reposition the
802.11g 54Mbps Router to reduce the effect of any of these obstacles.
If you have the 802.11g 54Mbps Router properly connected and can access the Internet but are
experiencing difficulties connecting with special applications (e.g., ICQ, Battle.net, etc.), you
must assign specific ports in order to bypass the firewall function. For more information about
how to configure this function, refer to the User Guide on the Installation CD.
I cannot access the router’s Web User Interface.
Possible Solution:
Make sure that the power cord and all the Ethernet cables are connected correctly. This includes
the cables connecting the 802.11g 54Mbps Router, the modem, and all the computers.
Possible Solution:
Make sure that your computer is using an IP address that is within the default range of
192.168.2.xxx. Make sure the address of the subnet mask is 255.255.255.0. The Default Gateway
should be the IP address of the 802.11g 54Mbps Router, which is 192.168.2.1.
Possible Solution:
You need to verify the connection setting of your Web browser and that the HTTP Proxy feature of
your Web browser is disabled. You need to do this so that your Web browser can read the config-
uration pages inside your 802.11g 54Mbps Router. Launch your Web browser.
Internet Explorer users: Click Tools, Internet Options, and then the Connections tab. Select
Never dial a connection, click Apply, and then click OK. Click To ol s again, then click Internet
Options. Click the Connections tab, and click the LAN Settings button. Clear all the check
boxes and click OK. Click OK to close Internet Options.
Netscape Navigator users: Click Edit, Preferences, and then double-click Advanced in the Cate-
gory window. Click Proxies, select Direct connection to the Internet, and then click OK. Click Edit
again, then click Preferences. Under Category, double-click Advanced, then click Proxies. Select
Downloaded from www.Manualslib.com manuals search engine
Verwandte Produkte und Handbücher für Vernetzung US Robotics Wireless Cable/DSL Router
Vernetzung US Robotics 3CP3453 Betriebsanweisung
(134 Seiten)
(134 Seiten)
Vernetzung US Robotics 3Com Betriebsanleitung
(40 Seiten)
(40 Seiten)
Sony Zubehör für Video Benutzerhandbücher
Beginnend mit C
Kommentare zu diesen Handbüchern